![]() The purpose of a Pickup Belt is to pick materials up from a Pile on the ground, and move them up onto the next belt in the system. This schematic shows the pickup zone and operation of a Lizard S-710 Pickup Belt. The system may contain any combination of these three piece types, depending on what purpose the conveyor system has been set up for, as explained in the next chapter. Each type of belt performs a completely different function as part of a combined Conveyor Belt system. Nonetheless, Conveyor Belts in general are in competition with Loaders for the task of moving loose cargo around.Ĭonveyor Belts come in three distinct varieties: Pickup Belts, Horizontal Belts, and Vertical Belts. Since each piece performs a completely different function along the belt system, they are not in competition with one another at all. Most pieces can be adjusted in various ways in order to connect them to one another and to precisely dump the cargo wherever it's needed.įarming Simulator 17 offers 3 different Conveyor Belt models - one from each of the three categories listed above. Any Conveyor Belt piece will dump its cargo into a receptacle if one is detected at the end of the belt, and can also be instructed to dump its cargo on the ground to create a new Pile.Įach Conveyor Belt piece can also be driven (at a very slow speed and low maneuverability) to adjust its position. They will always travel in a given direction, and will automatically continue from piece to piece, if the pieces are set up correctly. Materials can be dumped onto Conveyor Belts in a variety of ways. It all depends on what you're trying to accomplish with the particular Conveyor Belt system that you are setting up. None of the three pieces are mandatory - a conveyor system can work with any combination of any of the three groups, and you can connect multiple pieces from a single group together, if you need to.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |